Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
To set the path cost 19, the priority 16, and the state
enabled of the ports 1-5:
DGS-3224SR:4#config stp ports 1:1-1:5 cost 19 priority
16 state enabled
Command: config stp ports 1:1-1:5 cost 19 priority 16
state enabled
Success.
DGS-3224SR:4#
enable stp
Purpose
Used to globally enable STP on the switch.
Syntax
enable stp
Description
This command allows the Spanning Tree
Protocol to be globally enabled on the
switch.
Parameters
none.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To enable STP on the switch:
DGS-3224SR:4#enable stp
Command: enable stp
Success.
114
Advertisement
Table of Contents
