Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config sntp
Purpose
Used to configure SNTP on the switch.
config sntp {primary <ipaddr> |
Syntax
secondary <ipaddr> | poll-interval
<int30-99999>}
Description
This command is used to configure SNTP
on the switch.
primary − This is the primary server the
Parameters
SNTP information will be taken from.
<ipaddr> − The IP address of the primary
server.
secondary − This is the secondary server
the SNTP information will be taken from in
the event the primary server is unavailable.
<ipaddr>
secondary server.
poll-interval − This is the time the SNTP
information will be polled.
<int 30-99999> − The polling interval
ranges from 30 to 99,999 seconds.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure SNTP for the primary server for a switch:
−
The
IP
address
262
for
the
Advertisement
Table of Contents
