Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
Command Parameters
ipaddress <ipaddr> | state [enable | disable]}
Create syslog
{host(1) [all|<index 1-4>] { severity
[informational | warning | all] | facility [local0 |
local1 | local2 | local3 | local4 | local5 |local6 |
local7] | |udp_port <udp_port_numer> |
ipaddress <ipaddr> | state [enable | disable]}
Delete syslog
[<index 1-4> |all]
host
Show syslog
{index 1-4>}
host
Each command is listed, in detail, in the following sections.
show packet ports
Purpose
Used to display statistics about the packets
sent and received by the switch.
Syntax
show packet ports <portlist>
Description
This command is used to display statistics
about packets sent and received by ports
specified in the port list.
Parameters
<portlist> − specifies a range of ports to be
configured. The port list is specified by
listing the beginning port number and the
highest port number of the range.
The DGS3224SR is a stackable switch and
each port is designated as belonging to a
particular switch in the stack. For example,
94
Advertisement
Table of Contents
