Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config stp
value, the higher the priority. The default is
32,768. Range is 0 to 61440, in steps of
4096.
fbpdu [enabled|disabled] −
forwarding of STP BPDU packets from
other network devices when STP is disabled
on the switch. The default is enabled.
version - The version of Spanning Tree
Protocol the bridge is currently running.
Default is Rapid Spanning Tree Protocol
(rstp).
txholdcount - Used by the Port Transmit
state to limit the maximum transmission
rate. Default is 3.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To set maxage to 18 and hellotime to 4:
DGS-3224SR:4#config stp maxage 10 hellotime 4
Command: config stp maxage 10 hellotime 4
Success.
DGS-3224SR:4#
Allows the
111
Advertisement
Table of Contents
