Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
enable telnet
Parameters
<tcp_port_number>
number. TCP ports are numbered between
1 and 65535. The "well-known" TCP port
for the Telnet protocol is 23.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To enable Telnet and configure port number:
DGS-3224SR:4#enable telnet 23
Command: enable telnet 23
Success.
DGS-3224SR:4#
disable telnet
Purpose
Used to disable the Telnet protocol on the
switch.
Syntax
disable telnet
Description
This command is used to disable the Telnet
protocol on the switch.
Parameters
none.
−
the
TCP
35
port
Advertisement
Table of Contents
