D-Link DGS-3224SR Command Line Interface Reference Manual page 217

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config radius delete
this command.
Example Usage:
To delete previously
communication settings:
DGS-3224SR:4#config radius delete 1
Command: config radius delete 1
Success.
DGS-3224SR:4#
config radius
Purpose Used to configure the switch's Radius
settings.
Syntax config
{ipaddress
<server_ip>|key <passwd 32>|auth_port
<udp_port_number>|acct_port
<udp_port_number>}
Description The config radius command is used to
configure the switch's Radius settings.
Parameters <server_index 1-3> − Assigns a number to
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
<server_ip> − The IP address of the Radius
server.
configured Radius
radius <server_index
<server_ip> {ipaddress
217
server
1-3>