Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
show traffic_segmentation
Purpose
Used
segmentation table.
Syntax
show traffic_segmentation
Description
This command will display the current
traffic segmentation table.
Parameters
<portlist> - Specifies a range of ports. The
portlist is specified by listing the lowest
switch number and the beginning port
number on that switch, separated by a
colon. Then the highest switch number,
and the highest port number of the range
(also separated by a colon) are specified.
The beginning and end of the portlist range
are separated by a hyphen. For example,
1:3 would specify switch number 1, port 3;
2:4 specifies switch number 2, port 4.
Thus, 1:3-2:4 specifies all of the ports
between switch 1, port 3 and switch 2, port
4, in numerical order.
Restrictions
none.
Usage Example:
To display the traffic segmentation table:
DGS-3224SR:4#show traffic_segmentation 1-3
Command: show traffic_segmentation 1:1-1:3
Traffic Segmentation Table
to
display
the
current
246
traffic
Advertisement
Table of Contents
