D-Link DGS-3224SR Command Line Interface Reference Manual page 194

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config igmp_snooping querier
specific query messages, including those
sent in response to leave-group messages.
You might lower this interval to reduce the
amount of time it takes a router to detect
the loss of the last member of a group
Maximum value is 25.
state
switch to be specified as an IGMP Querier
or Non-querier.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure the igmp snooping querier:
UserName:
PassWord:
DGS-3224SR:4#config igmp_snooping querier default
query_interval 125 state enabled
Command: config igmp_snooping querier default
query_interval 125 state enabled
Success.
DGS-3224SR:4#
config router_ports
Purpose Used to configure ports as router ports.
−
[enabled|disabled]
194
.
Allows the