D-Link DGS-3224SR Command Line Interface Reference Manual page 263

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
DGS-3224SR:4#config sntp primary 10.52.19.7
Command: config sntp primary 10.52.19.7
Success.
DGS-3224SR:4#
enable sntp
Purpose Used to enable SNTP on the switch.
Syntax enable sntp
Description This command enables SNTP on a switch.
Parameters none.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To enable SNTP on the switch:
DGS-3224SR:4#enable sntp
Command: enable sntp
Success.
263