Table of Contents
Advertisement
DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
config radius add
port number for accounting requests. The
default is 1813.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure Radius server communication settings:
DGS-3224SR:4#config radius add 1 10.48.74.121 key dlink default
Command: config radius add 1 10.48.74.121 key dlink default
Success.
DGS-3224SR:4#
config radius delete
Purpose
Used to delete a previously entered Radius
server configuration.
Syntax
config radius delete <server_index 1-3>
Description
The config radius delete command is used
to delete a previously entered Radius server
configuration.
<server_index 1-3> − Assigns a number to
Parameters
the current set of Radius server settings.
Up to three groups of Radius server
settings can be entered on the switch.
Restrictions
Only administrator-level users can issue
this command
216
Advertisement
Table of Contents
