Install Slide Rails - StorageTek 9840 Product Manual

1

Install Slide Rails

Use the instructions below to install the slide rails on the rack:
1. Loosely attach the slide bracket to the rear of the slide-rail assembly using two screws
and nut plate (see figure below).
Note: Do not fully tighten the screws. You must adjust the slide bracket to fit the slide
rail between the vertical frame members.
1
3
95741
1. Screws (2)
2. Nut plate
3. Captive Nuts
2
3
C53680
1. Slide bracket adjustment screws (2)
2. Nut plate
3. Slide rail
2
C53257
Sixth Edition
Rack
3-33