Cartridge Removal From Feed Channel; Figure 6-15. Cartridge Removal - StorageTek 9840 User's Reference Manual

Modes of Operation
1. If there are no cartridges in the input bin, the Operator light flashes
signaling you to put a cartridge into the feed channel.
2. Press the
Note: Refer to

Cartridge Removal from Feed Channel

If the output bin is full (seven cartridges), and you load an eighth cartridge into
the feed channel for a priority mount, the cartridge cannot eject into the output
bin. The cartridge ejects into the feed channel. You must physically remove the
cartridge from the feed channel.
Follow these instructions to remove the eighth cartridge from the feed channel:
1. Remove all cartridges from the input and output bins.
2. Push the cartridge stop mechanism down.
3. Grasp the cartridge and remove it from the feed channel.

Figure 6-15. Cartridge Removal

6-20
switch to resume CSL operation.
Start
Figure 6-14 on page 6-19
feed channel.
CARTRIDGE
STOP
MECHANISM
Ninth Edition
to correctly load a cartridge into the
CARTRIDGE
FIRST
INDEX
ROD
C53618
95739