OE Max Controls CSDJ Plus User Manual page 98

Parameter Setting Related to Speed Control
Parameter Name
External speed
SEt-01
command gain
Auto adjustment of
USr-03
speed command offset
Manual adjustment of
Usr-05
speed command offset
SEt-19 Acceleration time
SEt-20 Deceleration time
SEt-21 S-curve operation time
SEt-26 Multi step speed 1
SEt-27 Multi step speed 2
SEt-28 Multi step speed 3
SEt-25 Multi step speed 4
Description
Speed per external analog input
voltage command (1V or 10V
according to setting of SEt-46 LED
No.2)
* Refer to 6.1 A. Speed Command
* Refer to Auto Adjustment of Speed/Torque Command Offset.
* Refer to Manual Adjustment of Speed/Torque Command Offset
Sets acceleration time from the zero
speed to rated speed.
* Refer to Acceleration/Deceleration
Time and S-Curve Operation.
Sets deceleration time from the rated
speed to the zero speed.
* Refer to Acceleration/Deceleration
Time and S-Curve Operation.
Sets the S-curve time for during
acceleration/deceleration.
* Refer to Acceleration/Deceleration
Time and S-Curve Operation.
- Sets speed commands when using
multi step speed control mode (SEt-
41=3)
- Select speed command according
to the input terminal P-CL(CN1 9),
N-CL(CN1 8), as shown below.-
------
Speed selection
P-CL
Multi step speed 1 OFF
Multi step speed 2 ON
Multi step speed 3 ON
Stop OFF
Select forward and reverse rotation
operation command with (CN1 4)
input terminal
Rotation direction
P-CON
Forward direction
Reverse direction
* Refer to Multi Step Speed Control
Mode
Sets multi step speed 2
Sets multi step speed 3
Sets multi step speed 4
* Refer to Speed/Multi Step Speed
Control Mode .
Setting
Unit
Range
RPM/V
10~6000
(RPM/10V)
ms 0~60000
ms 0~60000
ms 0~5000
-----
N-CL
RPM 0~5000
ON
OFF
ON
OFF
-------
OFF
ON
RPM 0~5000
RPM 0~5000
RPM 0~5000
Factory
Setting
500
0
0
10
100
200
300
500
-
5 12