Fig 6.9 Zero-Clamp Operation - OE Max Controls CSDJ Plus User Manual

Fig 6.9 Zero-Clamp Operation

Auto Zero-Clamp Speed Control Mode
This is a control mode, which always operates zero-clamp function.
Other operations are same as manual zero-clamp speed control mode.
Table 6.7 Auto Zero-Clamp Speed Control Mode Setting
SEt-41
SEt-17
V-ref (CN1 pin 19,20)
P-CON (CN1 pin 6)
ON: The corresponding input terminal is connected to input voltage
GND(0V)
OFF: The corresponding input terminal is connected to +24VIN or it is
not connected
Setting
5
1~5000[RPM]
-10~10V
ON
OFF
Description
Auto zero-clamp speed control mode
Zero-Clamp Operation Level
Speed command
P control
PI control
6-13