OE Max Controls CSDJ Plus User Manual page 59

Startup by I/O Input
This section describes the speed control mode operation by I/O input.
• Servo ON by I/O input
The Servo-ON status is made when inputting ON signal in SERVO
ON/OFF input terminal SV-ON (CN1 pin number 3).
Fig 3.6 Servo ON
Operator displays the following when the servo is ON from speed
control mode.
• Speed Control Mode
Setting of the speed control mode:
Setting value of SEt-41 = 1
(Different according to the
control mode.)
3-11