Fig 6.6 Using The Step 4 Speed - OE Max Controls CSDJ Plus User Manual

Control Mode Setting
Step 4 Speed
Command Selection
Direction Conversion
Command Selection
Step 4 Speed
Command Setting
6-10
• Using the Step 4 Speed

Fig 6.6 Using the Step 4 Speed

- Step 4 speed command can be used in multi step speed control
mode or speed/multi step speed control mode.
- In order to use step 4 speed command, set '2' in SEt-46 LED No. 4 or
5 and set the pin 10 or 15 of CN1 as step 4 speed command.
- If the step 4 speed command is on, ignore other step x speed
command and rotates in the speed set in SEt-25.
* The rotation of direction is selected by pin 10 or 15 of CN1 in
Speed/Multi step speed control mode(SEt-41=14). If you use pin
10 of CN1 as the step 4 speed command, you must use pin 15 of
CN1 as the direction conversion command.
In Multi step speed control mode(SEt-41=3), Use
terminal for changing the direction of rotation.
Table 6.5 Step 4 Speed Usage Setting
SEt-41= 3
Multi-Step Speed Control mode
SEt-46 LED No.4=3, Pin 10 of CN1
SEt-46 LED No.5=3, Pin 15 of CN1
/P-CON
SEt-41=14
Speed/Multi Step Speed Control Mode
SEt-46 LED No.4=2
Pin 10 of CN1
SEt-46 LED No.5=3
Pin 15 of CN1
Setting of SEt-25 [RPM]
input
P-CON
SEt-46 LED No.5=2
Pin 15 of CN1
SEt-46 LED No.4=3
Pin 10 of CN1