Fig 2.12 Grounding And Noise Filter For Noise Reduction - OE Max Controls CSDJ Plus User Manual

Fig 2.12 Grounding and Noise Filter for Noise Reduction

Noise Filter
Noise filter should be located as close as possible to the drive.
Make sure to check the current capacity of the noise filter.
Recommended noise filter is shown in the following table.
Table 2.7 Recommended Noise Filter
Power
Servo Drive
Supply
CSDJ-0102B
CSDJ-0406B
Single Phase
220VAC
CSDJ-10B
When using several servos, one noise filter could be shared.
However, utilize the noise filter with appropriate capacity, which fits
the capacity for several servos.
* Samil Components Co., Ltd
Recommended Noise Filter
Recommended Noise Filter
Noise Filter
Model Name
NFR-205TS
NFR-210TS
NFR-220TS
Tel. 82-2-478-6800~4
Fax. 82-2-476-3200
http://www.samilemc.com
Spec.
250V/5A
250V/10A
250V/20A
2-21