OE Max Controls CSDJ Plus User Manual page 5

Precautions when repairing
iv
This servo drive has high voltage terminal, thus it
is very dangerous. Do not touch it.
- There may be electric shock.
Repair and check after sufficient amount of time
has passed after cutting off the main circuit
power.
- It is dangerous because power flows in the capacitor.
Except for the people appointed, do not repair,
check, nor replace the parts.
- Before the operation, remove the metals (watch, ring,
etc) from the body. Operate after preparing the tools to
handle insulation. There may be electric shock.
Control board uses C-MOS. Be aware when han-
dling it.
- When touching with hand, the product may be dam-
aged due to static electricity.
During being energized, do not exchange the wire
or remove the connector and etc.
- There may be injuries or damage in products.
Do not modify the production.
- There may be electric shock or injuries.