OE Max Controls CSDJ Plus User Manual page 144

Parameter
SEt-10
SEt-11
6-38
Torque Limit
• Block Diagram of Torque Limit
• T-S Curve
- Allowable maximum torque differs according to the motor
rotation speed. Here, limit the maximum torque according to
motor rotation speed.
- For T-S Curve of the motor used, check the motor specification of
the appendix.
- The examples of T-S Curve is as follows.
• Internal Torque Limit
Torque limit can be set using the user parameter.
In case of which the torque limit value is low, acceleration/
deceleration time may increase.
Name Description
Forward Rotation
Limits the
Torque Limit
torque in set
Reverse Rotation
value.
Torque Limit
Setting Factory
Unit
Range Setting
0~300 300 %
Mode Change during
Used the Operation
P/S/t Possible