Fig 6.34 Using The Rotation Prohibition Input Signal - OE Max Controls CSDJ Plus User Manual

Using Rotation Prohibition Function
In such cases as linear machine, in order to protect from mechanical
damage, it can be used by connecting the limit switch. Also, it can be
also used so the motor rotates only in one direction.
Motor operates emergency stop when P-OT is on during the forward
rotation.
Motor operates emergency stop when N-OT is on during the reverse
operation.
Set the emergency stop method in SEt-44. (Refer to 6.4 D. Emergency
Stop.)

Fig 6.34 Using the Rotation Prohibition Input Signal

I/O Pin No.
P-OT CN1 Pin 4
N-OT CN1 Pin 5
ON : The corresponding input terminal is connected to +24VIN or not
connected.
OFF : The corresponding input terminal is connected to the input
voltage GND(0V).
If this input terminal is not used, it must be opened.
OFF: Forward Rotation Operation is Possible
ON : Forward Rotation Operation is Impossible
OFF: Reverse Rotation Operation is Possible
ON : Reverse Rotation Operation is Impossible
Description
6-45