Fig 2.5 Installation Of Servo Drive (Wall Mounting Type); Fig 2.6 Installation Of Servo Drive (Installing In The Panel) - OE Max Controls CSDJ Plus User Manual

Installing Servo Drive
Installation
- Servo drive is designed for base mounting type. For natural cooling
effect, the vertical mounting is standard. Follow this mounting
direction for cooling effect.

Fig 2.5 Installation of Servo Drive (Wall mounting type)

Control board uses C-MOS. Be aware when
handling it.
- When touching with hand, the product may be
damaged due to static electricity
- Also when installing the servo drive in rack or panel, if the ambient
temperature is higher than the allowable limit, install the cooling
fan and reconsider mechanical layout so it can be operated in
allowable temperature (55℃). Ambient temperature is closely
related to the life span of the product. Use it in low temperature if
possible.

Fig 2.6 Installation of Servo Drive (Installing in the panel)

2-9