Fig 3.1 Example Of Power On And Off - OE Max Controls CSDJ Plus User Manual

Color
Green
Orange
Red/Green
3-4
Startup
In order to avoid unexpected accidents during startup,
operate the servo motor without the load.
When startup is done with the load, then operate the
servo motor after setting the system, so that the operation
can be emergency stopped anytime.
When the load is connected and startup is done with the
operator, set the acceleration and deceleration time prop-
erly in SEt-19 and SEt-20.
Powering ON and OFF
When supplying the power with the power sequence made, the power
is supplied to the push button switch, and the user must push the
button for one second. Check the color of LED and proceed according
to the procedure.

Fig 3.1 Example of Power ON and OFF

• LED Display
Table 3.1 LED Color and Description
Servo Power ON
Servo ON
Alarm (Flickers in green and red every 0.2 seconds.)
Servo Drive Status