Fig 6.25 Example Of Electronic Gear Setting (Ball Screw); Fig 6.26 Example Of Electronic Gear Setting (Belt+Pulley) - OE Max Controls CSDJ Plus User Manual

Electronic Gear
Only apply in position control mode.
Outline and setting of electronic gear are as follow.
- The electronic gear function enables the motor travel distance per
position input command pulse to be set to any value. It allows the
host controller to perform control without having to consider the
machine gear ratio and the number of encoder pulses. Electronic
gear is set in SEt-36, SEt-37.
Parameter
Parameter
Name
Electronic
SEt-36 Gear Ratio
Numerator
Electronic
SEt-37 Gear Ratio
Denominator
- For example, if the machine gear ratio is 1:1 and setting value of
SEt-36 and SEt-37 is the Factory setting value, the motor rotates
once when host controller sends 2048 pulses. Here, if you want to
rotate the motor once when host controller sends 1000 pulses. Set
the Set-37 to 1000.

Fig 6.25 Example of Electronic Gear Setting (Ball Screw)

Fig 6.26 Example of Electronic Gear Setting (Belt+Pulley)

Setting
Range
Number of pulse per 1 motor rotation x Machine gear
ratio of load and motor shaft.
1~65535
Number of position command pulse per 1 rotation of
load shaft.
Description
Factory
Setting
2048
2048
6-31