Speed Command
In case of speed control, analog input voltage value of pin 19-20 of CN1
becomes the speed command value.
The relationship between the speed command value and input voltage
is set in SEt-01.
• Composition
Fig 6.2 Analog Speed Command Input Circuit
• Relationship Between the Input Voltage Value and Speed
Command
Controls the speed in proportion to input voltage V-ref.
Fig 6.3 Analog Input Voltage and Speed
Speed command can be changed in constant input voltage by
changing the setting value of SEt-01.
Speed Command [RPM] = Setting value of SEt-01[RPM/V] or [RPM/10V] x Input Voltage
Value[V]
6-6