OE Max Controls CSDJ Plus User Manual page 4

Precautions when Wiring
Operate only after checking that input power is
off.
- There may be electric shock or fire.
Only the electrician should do the wiring.
- There may be electric shock or fire.
In case of wiring emergency stop circuit, check
the operation after wiring (Wiring responsibility is
on the user.)
- There may be injuries.
Be sure to make the earth of grounding terminal.
(Class 3 grounding)
- There may be electric shock or fire.
Cooling fin and electric discharge resistor over-
heats, so do not touch with hands.
- It may cause burns.
It is easy to change the speed of servo drive from
low to high, thus operate after checking the motor
and mechanical allowable limit.
- There may be injuries.
Do not check signal during the operation.
- The product may be damaged.
Each gain of this servo drive is properly set upon
the delivery for the non-load operation. When
changing the setting, pay extra caution.
- The product may be damaged.
iii