Dynamic Brake
CSDJ Plus Servo Drive has a built-in dynamic brake, which can be used
to emergency stop the motor.
Dynamic brake, an electrical brake, which is supported by CSDJ Plus is
completely different from a mechanical brake.
Fig 7.1 Dynamic Brake
•
Dynamic brake operates in the following circumstances.
1) When servo alarm occurs
2) When servo status is changed from Servo ON to Servo OFF
3) When power voltage is not supplied
4) When excessive operation occurs
5) P-OT signal is on during the forward rotation and when SEt-44 LED
No.1 = 0
6) N-OT signal is on during the reverse rotation and when SEt-44 LED
No.1 = 0
7) E-STOP signal is on and when SEt-44 LED No.1 = 0
* Refer to Selection of Stop Method.
7-3