Fig 6.17 Wiring For Position Command Of Line Drive Output; Fig 6.18 Wiring For Position Command Of Open Collector Out- Put - OE Max Controls CSDJ Plus User Manual

SEt-37
2048
4000
5000
10000
6-22
For example, if the setting value of SEt-36 is set to number of pulse for
one rotation of the encoder, motor rotation speed according to
command pulse frequency is as follows.
Motor Speed
3000 RPM
3000 RPM
3000 RPM
3000 RPM
- When the command pulse form is A, B phase pulse train with 90
phase difference, motor rotation speed differs according to the
command pulse multiplication.
• In Case of Line Drive

Fig 6.17 Wiring for Position Command of Line Drive Output

• In Case of Open Collector
Fig 6.18 Wiring for Position Command of Open Collector Out-
put
Command Pulse Frequency
102.4 kpps
200 kpps
250 kpps
500 kpps
O