OE Max Controls CSDJ Plus User Manual page 2

•
Thank you for purchasing Rockwell Samsung Automation CSDJ
Plus Servo Drive.
•
This user's manual explains handling method, repair, inspection,
error diagnosis, troubleshooting and, specifications of the CSDJ
Plus Servo Drive.
•
Use the CSDJ Plus after completely understanding this user's man-
ual.
Precautions during Initial Setup
When setting up the product, select Encoder Type (SEt-51), Motor
Type (SEt-52), Motor Capacity (SEt-53), Control Mode (SEt-41) such
as position, speed, and etc. after supplying the power.
* After the change, turn off and on the power.
*
For detailed information, refer to Parameter List.
Error such as Control Impossibility or Encoder Open Error may occur
if the parameter selection is incorrectly set as stated above.
General Precautions
This user's manual may be changed without notice in case of prod-
uct improvement or specification change, or for better understand-
ing of the manual.
Use the user's manual included in the product purchased.
When re-ordering the user's manual due to damage or loss, contact
company agency or an agency closeby recorded on the back of this
manual.
Do not disassemble the servo drive. A/S is not provided for any acci-
dents or damages caused by the disassembly or modification of the
servo drive by the user.
i