Fig 2.6 Installation Of Servo Drive (Wall Mounting Type); Fig 2.7 Installation Of Servo Drive (Installing In The Panel) - OE Max Controls CSDJ Plus User Manual

2 - 10 CSDJ Plus Servo Drive User's Manual
B. Installing the Servo Drive
1) Installation
- Servo drive is designed for base mounting type. For natural cooling effect, the vertical
mounting is standard. Follow this mounting direction for cooling effect.
Wall mounting type

Fig 2.6 Installation of Servo Drive (Wall mounting type)

Control board uses C-MOS. Be aware when handling it.
Caution
- When touching with hand, the product may be damaged due to static electricity
- Also when installing the servo drive in rack or panel, if the ambient temperature is
higher than the allowable limit, install the cooling fan and reconsider mechanical
layout so it can be operated in allowable temperature (55℃). Ambient temperature is
closely related to the life span of the product. Use it in low temperature if possible.
A

Fig 2.7 Installation of Servo Drive (Installing in the panel)

Ventilation
B
C
Front view
A
C
30mm
or more
B C
10mm 50mm
or more or more