Pluggable Interfaces For The Switches - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

ExtremeSwitching Switches
Table 37: X870 Front Panel LEDs
Label or Type
STAT
PWR
MGMT
FAN
1, 2, 3, 4, 5, 6
Locator
Ethernet ports 1-32 (not
partitioned)
Ethernet ports 1-128
(partitioned into data
lanes – see
X870 Switch Ports into
Data Lanes

Pluggable Interfaces for the Switches

Many ExtremeSwitching switches include ports that are compatible with a variety of optical modules,
including SFP, SFP+, SFP28, QSFP+, and QSFP28 transceivers and cables. Extreme Networks optical
modules are tested to work in all supported Extreme Networks devices. We recommend that all
customers use Extreme Networks optical modules in their Extreme Networks devices.
Color/State
Slow blinking green (1 Hz)
Fast blinking green (2 Hz)
Steady green
Blinking amber
Off
Steady green
Blinking amber
Off
Steady green
Blinking green
Off
Steady green
Blinking amber
Off
Blinking blue
Off
Steady white
Blinking white
Off
Steady green
Blinking green
Partitioning
Off
on page 112)
Pluggable Interfaces for the Switches
Meaning
Normal operation
Power-on self test (POST) in progress
or
Switch diagnostics are running
POST passed: system is booting image
System is disabled: POST failed or system
overheated
No external power is attached
Power on
Power supply failure – one of:
• Over voltage
• Over current
• Over temperature
Power off; no power attached
Link up
Packet transmitting or receiving
Link not up or port disabled
All diagnostics passed; fan module is
operational
Failure
No power to fan module
Locator function enabled
Locator function disabled
Link up, no activity
Packet transmitting or receiving
Link not up or port disabled
Link up, no activity
Packet transmitting or receiving
Link not up or port disabled
ExtremeSwitching Hardware Installation Guide 117