Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual page 73

ExtremeSwitching Switches
Table 15: X460-G2 Front Panel LEDs (continued)
Label or Type
S1, S2 (Stack
Management)
FAN
P1, P2
(Power Supply)
Ethernet Port 1-32 or 1-52 Steady green
1G SFP ports or 10G SFP+
ports 29, 30, 31, and 32 or
53, 54, 55, and 56
Table 16 on page 74 describes the meanings of additional port LEDs on the following X460-G2 PoE
switch models:
•
X460-G2-24p-GE4
•
X460-G2-24p-10GE4
•
X460-G2-48p-GE4
•
X460-G2-48p-10GE4
ExtremeSwitching X460-G2 Series Switch LEDs
Color/State
Steady green
Blinking green
Steady green
Blinking amber
Off
Steady green
Steady amber
Blinking amber
Off
Blinking green
Off
Steady green
Blinking green
Off
ExtremeSwitching Hardware Installation Guide
Meaning
Link OK on the indicated stacking port
Activity on the indicated stacking port
Normal operation
Failure
No power
Normal operation
Non-PoE models: PSU present, but no input
power
PoE models: Not supported
Power failure
No power is attached
Link OK
Activity on the indicated port
No link or port disabled
Link OK
Activity on the indicated port
No 1G or 10G link, or port disabled
73