Extremeswitching X450-G2-48T-10Ge4 Switch Ports And Slots - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

ExtremeSwitching Switches
3
MGT FAN P1 P2 S1 S2
1
CLK ACT LINK
STACK NO. CONSOLE
1 2
Figure 42: X450-G2-48t-GE4 Front Panel
1 = Stack number indicator
2 = Console port/Ethernet management port
3 = USB port
1
SummitStack-V84
1
2
Figure 43: X450-G2-48t-GE4 Rear Panel
1 = 21 Gb stacking ports (QSFP+)
2 = Redundant power supply (RPS) connector
3 = Front-to-back fan module slot

ExtremeSwitching X450-G2-48t-10GE4 Switch Ports and Slots

X450-G2-48t-10GE4 switch ports and slots include:
•
48 front panel ports of 10/100/1000BASE-T (ports 1–48).
•
Four front panel ports of 10GBASE-X SFP+ (ports 49–52, with ports 51 and 52 configurable to be
stacking ports). The SFP+ ports are dual speed (1 Gb/10 Gb).
•
Front panel USB port.
•
Ethernet management port 1 x 10/100/1000BASE-T.
•
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local
management.
•
One fixed power supply.
•
One rear redundant power supply connector.
•
One rear slot for fan module with front-to-back airflow.
•
Two dedicated QSFP-form factor 21 Gb stacking ports on the rear panel.
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Summit
2
Redundant Power Input
! See Manual
ExtremeSwitching X450-G2-48t-10GE4 Switch Ports
4
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
X450-G2-48t-GE4
™
4 = 10/100/1000BASE-T ports
5 = SFP 1GBASE-X ports
3
ExtremeSwitching Hardware Installation Guide
5
38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
GbES FP
4 5
4 = AC power input connector
5 = Grounding screw
and Slots
51