Site Preparation; Planning Your Site - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Site Preparation

Planning Your Site

Operating Environment Requirements
Rack Specifications and Recommendations
Evaluating and Meeting Cable Requirements
Meeting Power Requirements
Following Applicable Industry Standards
By carefully planning your site, you can maximize the performance of your existing network and ensure
that it is ready to migrate to future networking technologies.
The information in this chapter is intended for the system administrator, network equipment technician,
network manager, or facilities manager responsible for installing and managing the network hardware.
The chapter assumes a working knowledge of local area network (LAN) operations, and a familiarity
with communications protocols that are used on interconnected LANs.
Only qualified service personnel should install, maintain, or remove a switch, chassis, or its components.
Qualified service personnel have had appropriate technical training and experience that is necessary to
be aware of the hazards to which they are exposed when performing a task and of measures to
minimize the danger to themselves or other people.
Note
Before installing or removing any components of the system, and before carrying out any
maintenance procedures, read the safety information in "Technical Specifications."
Planning Your Site
To install your equipment successfully, you should plan the site carefully. The site planning process has
three major parts:
1. Meeting site requirements.
The physical installation site must meet the following requirements for a safe and successful
installation:
•
Building and electrical code requirements
•
Environmental, safety, and thermal requirements for the equipment you plan to install
•
Equipment rack requirements
2. Evaluating and meeting cable requirements.
on page 163
on page 164
on page 176
ExtremeSwitching Hardware Installation Guide
on page 167
on page 169
on page 178
163