V300 Virtual Port Extender Leds; V400 Virtual Port Extender - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

V300 Virtual Port Extender LEDs

V300 Virtual Port Extender LEDs
The V300 Virtual Port Extender front panel LEDs observe the following behavior:
Table 60: V300 Virtual Port Extender LEDs
Location
LED Per device
LED Per RJ45
Port 1-8 (PSE)
LED Per RJ45
Port 9-10 (PD)

V400 Virtual Port Extender

Bridge port extenders (BPEs) are devices that do not fully process packets, nor make forwarding or
filtering decisions. Instead, they simply receive packets from extended ports and forward packets
toward the upstream controlling bridge (an ExtremeXOS-based switch) for L2/L3 processing. This
scheme, based on the IEEE 802.1BR specification, is known as extended edge switching.
The V400 Virtual Port Extender offers the following features:
•
24 or 48 10/100/1000 Base-T ports that provide 10 Gbps copper connectivity.
•
Two or four 1000/10G Base-X SFP+ ports that provide 10 Gbps high-density fiber connectivity.
•
Serial console port.
•
Front panel USB port.
•
PoE+ power on some models.
•
Fixed internal power-supply and fan modules.
All models include either two or four SFP+ ports on the faceplate of each base unit, which can be
provisioned either as uplink or cascade ports. This gives administrators the option to create redundant
146 ExtremeSwitching Hardware Installation Guide
LED Indicative Color
PWR LED (Top) Green
Amber Solid
System LED (Bottom) Green
Amber Flash
Link/Act (left) Green
PoE (right) Amber Off
Link/Act (left) Green
PoE (right) Amber Off
PoE model
Status Description
Off Power off
Solid Power on
External PSU 2 fail (For non-PD model)
Flash External PSU 1 fail (For non-PD model)
Off System off
Solid System on and ready
Flash Booting
Fail (Controlled by MPP)
Off No Link
Solid Link is established
Flash Link activity
No PD detected
Solid PD is detected
Off No link
Solid Link is established
Flash Link activity
No PSE power is provided
Solid PSE power is supplied
Expansion Modules