Lrm/Macsec Adapter - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Expansion Modules
links or downstream cascade ports to other V400 units. The SFP+ ports are the only ones that can be
used as uplink ports in a cascading configuration.
The V400 Virtual Port Extender requires that ExtremeXOS (EXOS) version 22.5 (or later) be installed on
the switch to which it is attached. For more information about configuring EXOS for use with this
equipment, see the
Optionally, you can use the VX-RPS-1000 redundant power supply to provide backup or additive power
for the V400 Virtual Port Extender. For more information, see
on page 130.
Figure 131: V400 Virtual Port Extender Front Panel (48-port Model Shown)
1 = 10/100/1000BASE-T ports
2 = Console/management port
Figure 132: V400 Virtual Port Extender Rear Panel
1 = Grounding lug
2 = RPS connector (some models

LRM/MACsec Adapter

The LRM/MACsec Adapter offers:
•
Support for 10Gb Long Reach Multimode (LRM) connections. The adapter plugs into SFP+ ports that
do not support LRM, effectively turning them into LRM-capable ports.
•
Improved security through MACsec link encryption for connections leaving a building or campus.
ExtremeXOS 30.7 User Guide.
VX-RPS-1000 Redundant Power Supply
3 = 10Gb SFP+ ports
4 = USB port
3 = AC power input connector
ExtremeSwitching Hardware Installation Guide
LRM/MACsec Adapter
147