Dc Power Supplies; Summit 1100 W Ac Power Supplies (10941, 10942) - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

Technical Specifications

DC Power Supplies

The following Summit 1100 W DC power supplies are available for use in ExtremeSwitching X690 and
X870 series switches.
•
Summit 1100 W DC power supply: front-to-back airflow (part no. 10962)
•
Summit 1100 W DC power supply: back-to-front airflow (part no. 10963)
See Summit 1100 W DC Power Supplies (10962, 10963)

Summit 1100 W AC Power Supplies (10941, 10942)

Table 319: Physical Specifications
Dimensions
Weight
Table 320: Power Specifications
Voltage input range
Nominal input ratings
Maximum inrush current
Output
Power supply input socket and cord
Power cord wall plug
Efficiency
Table 321: Environmental Specifications
Operating temperature
Storage temperature
Operating humidity
Operational shock
on page 464 for details.
Height: 1.57 inches (4.0 cm)
Width: 3.25 inches (8.3 cm)
Length: 10.22 inches (26.0 cm)
2.55 lb (1.12 kg)
100-127/200-240 47 to 63Hz
12.5 A max at 115VAC and 6 A max at 230VAC at full 1100 W load
45A at Max 264 VAC at 25C with cold start
54 V, 20 A max, 1100 W
IEC/EN 60320-1/C16 AC input receptacles
Refer to Power Cord Requirements for AC-Powered Switches
and AC Power Supplies on page 475.
Minimum efficiency: 88% at maximum power output.
-10°C to 50°C (normal operation)
-40°C to 70°C
93% relative humidity, non-condensing at 30C
30 m/s 2 (3 G)
ExtremeSwitching Hardware Installation Guide 463
DC Power Supplies