Extremeswitching X440-G2-24X-10Ge4 Switch Ports And Slots - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

ExtremeSwitching Switches
Figure 18: ExtremeSwitching X440-G2-24t-10GE4 Front Panel
1 = Stack number indicator
2 = Console port/Ethernet management port
3 = USB port (active with ExtremeXOS version 22.2 or later)
Figure 19: ExtremeSwitching X440-G2-24t-10GE4 Rear Panel
1 = Grounding lug
2 = SFP Ports upgradeable to 10GBASE-X

ExtremeSwitching X440-G2-24x-10GE4 Switch Ports and Slots

The ExtremeSwitching X440-G2-24x-10GE4 switch ports and slots include:
•
24 front panel 1GBASE-X SFP ports.
•
Four unpopulated front panel 10/100/1000BASE-T (RJ45) ports.
•
Four unpopulated rear panel 1GBASE-X SFP+ ports that can be used as either 1Gb ports or 10Gb
ports, where the 10Gb configuration requires an upgrade through additional licensing..
Alternately, you can convert two of the ports to stacking ports using the enable stacking-
support command. Doing so would provide you with the option of two 1Gb ports and two stack
ports or two 10Gb ports and two stack ports. In the latter configuration, an additional license would
be required for the 10Gb non-stacking ports.
•
Ethernet management port (10/100/1000BASE-T).
•
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local
management.
ExtremeSwitching X440-G2-24x-10GE4 Switch Ports
4 = 10/100/1000BASE-T copper ports
5 = 1000BASE-X SFP combination ports
3 = Redundant power input
4 = AC power input socket
ExtremeSwitching Hardware Installation Guide
and Slots
35