Installing External Power Supplies; Safety Considerations For Installing Power Supplies - Extreme Networks ExtremeSwitching X435 Series Hardware Installation Manual

For switches using extremexos version 30
Table of Contents

Advertisement

Installing External Power Supplies

Safety Considerations for Installing Power Supplies

Pre-installation Requirements
Installing an EPS-C2 Power Supply
Installing an RPS-150XT Redundant Power Supply
Installing an RPS-500p Redundant Power Supply
Installing an STK-RPS-150PS Redundant Power Supply
Installing an STK-RPS-1005PS Redundant Power Supply
Installing a VX-RPS-1000 Redundant Power Supply
Read the information in the following sections thoroughly before you attempt to install or remove an
external power supply.
For information about installing external power supplies that work with other Extreme Networks
switches, refer to
Using ExtremeXOS 16 or
Safety Considerations for Installing Power Supplies
Only trained service personnel should perform service to Extreme Networks switches and their
components.
Trained service personnel have read all related installation manuals, have the technical training and
experience necessary to be aware of the hazards to which they are exposed in performing a task, and
are aware of measures to minimize the danger to themselves or other persons.
Caution
Extreme Redundant Power Supplies (RPS) do not support the ability for the RPS to be
connected to an operational switch. Connecting an RPS to an operational switch can have an
adverse effect on the switch. It is best practice that both the switch and the RPS be powered
down prior to cabling them together. Once the cabling is completed, turn on the RPS, then
turn on the switch.
Warning
Extreme Networks AC power supplies do not have switches for turning the unit on and off. To
disconnect the power to an Extreme Networks AC power supply, remove the wall plug from
the electrical outlet. Make sure that this connection is easily accessible.
on page 264
ExtremeSwitching and Summit Switches: Hardware Installation Guide for Switches
Earlier.
on page 263
on page 264
on page 273
on page 277
on page 280
on page 286
on page 290
ExtremeSwitching Hardware Installation Guide 263

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Extremeswitching x440-g2 seriesExtremeswitching x450-g2 seriesExtremeswitching x460-g2 seriesExtremeswitching x465 seriesExtremeswitching x590 seriesExtremeswitching x620 series ... Show all

Table of Contents