Chapter 3: Viewing Status Information
In This Chapter
Logging into the HTTP Interface
●
System Status
●
Logging into the HTTP Interface
Once the AP has a valid IP Address and an Ethernet connection, you may use your web
browser to monitor the system status.
Follow these steps to monitor an AP's operating statistics using the HTTP interface:
1. Open a Web browser on a network computer.
Note:
The HTTP interface supports the following Web browser:
Note:
Microsoft Internet Explorer 6 with Service Pack 1 or later
●
Netscape 6.1 or later
●
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these
steps:
a. Select Tools > Internet Options....
b. Click the Connections tab.
c. Click LAN Settings....
d. If necessary, remove the check mark from the Use a proxy server box.
e. Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
Result: The Enter Network Password screen appears. See
on page 57
on page 58
Figure
18.
Issue 1 October 2004
57