Configure Multiple Ssid/Vlan/Security Mode Entries - Avaya AP-3 User Manual

Access point

Hide thumbs Also See for AP-3:

Table of Contents

Configure Multiple SSID/VLAN/Security Mode

Each SSID/VLAN can have its own security mode, so that customers can

have multiple types of clients (non-WEP, WEP, 802.1x, WPA) on the same

system, but separated by VLAN.

You must reboot the AP before any changes to these parameters

take effect.

1. Click Configure > SSID/VLAN/Security > Mgmt VLAN.

2. Place a check mark in the Enable VLAN Protocol box to enable

VLAN support. If VLAN is disabled, all table entries on the

SSID/VLAN/Security page will be disabled.

3. Click the tab for Wireless A or Wireless B (if applicable).

4. Place a check in the Enable Security Per SSID check box.

Avaya Wireless AP-3 User's Guide

Configure Multiple SSID/VLAN/Security Mode Entries