Syslog Host Table - Avaya Wireless AP-3 User Manual

Parameter Tables
NOTE:
The Heartbeat parameters are advanced settings not available via
the HTTP interface. When Heartbeat is enabled, the AP periodically
sends a message to the Syslog server to indicate that it is active.
The frequency with which the heartbeat message is sent depends
upon the setting of the Heartbeat Interval.

Syslog Host Table

The table described below configures the Syslog hosts that will receive
message from the AP. You can configure up to ten Syslog hosts.
Name
Syslog Host Table
Table Index
IP Address
Comment (optional)
Status (optional)
A-98
Type Values
Table N/A
Integer 1 – 10
IpAddress User Defined
DisplayString User Defined
Integer enable
disable
delete
Access CLI Parameter
R sysloghosttbl
N/A index
RW ipaddr
RW cmt
RW status
Avaya Wireless AP-3 User's Guide