Dhcp Server Commands; Dhcp Server Parameters - Avaya AP-3 User Manual

DHCP Server Commands

!
CAUTION:
Before enabling DHCP server on the AP, confirm that the IP address
pools you have configured are valid addresses on the network and do not
overlap the addresses assigned by any other DHCP server on the net-
work. Enabling this feature with incorrect address pools will cause prob-
lems on your network.

DHCP Server Parameters

Name
DHCP Server
DHCP Server
Status
Gateway IP
Address
Primary DNS IP
Address
Secondary DNS
IP Address
Number of IP Pool
Table Entries
Avaya Wireless AP-3 User's Guide
Type Values
Group N/A
Integer enable (1) (default)
disable (2)
delete (3)
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer32 N/A
DHCP Server Commands
Access CLI Parameter
R dhcp
RW dhcpstatus
RW dhcpgw
RW dhcppridnsipaddr
RW dhcpsecdnsipaddr
R dhcpippooltblent
A-43