Front Panel Leds; Rear Panel Leds - Lightware HDMI-TPS-TX210 User Manual

   
2.ProductOverview
2.3. Front Panel LEDs
VIDEO INPUT LEDs
off The video source is not selected.
blinking Thevideosourceisselectedbutsignalisnotdetected.
green
green on Thevideosourceisselectedandsignalisdetected.
AUDIO INPUT LEDs
off The audio source is not selected.
blinkingslow Audio source is selected, the audio is embedded to the output video stream.
green
The audio source is selected but no signal is detected, regardless of the
blinkingfast
green
outputmode(e.g.DVIEDIDisemulatedontheportwithHDMIsignal).
Audio source is selected, the port is active but audio is not embedded in the
on
green
videostream(e.g.theoutputmodeisDVI).
HDCP LED
off VideooutputsignalisnotencryptedwithHDCP.
on VideooutputsignalisencryptedwithHDCP.
green
AUTOSELECT LED
off Autoselect function is disabled.
Autoselectfunctionisenabled,searchingforsignal(thevideoinputLEDsare
blinking
green
alsoblinking).
Autoselectfunctionisenabled,theactivevideosignalisfound(theselected
on
green
videoinput'sLEDisalsoON).
HDMI-TPS-TX200series–User'sManual
2.4. Rear Panel LEDs
LIVE LED
green
green
green
RS-232 LED
green
green
SRVC LED
Reservedforfuturedevelopments.
LINK LED
green
green
green
SeemoredetailsabouttheTPSmodesintheTPSInterface
Appliedfirmwarepackage:v1.2.0 | LDCsoftware:v2.2.0
off The device is not powered.
blinkingslow The device is powered and operational.
blinkingfast Thedeviceisinfirmwareupgrade(bootload)mode.
on The device is powered but not operational.
off RS-232ports(LocalandLink)areinPass-throughMode.
blinking CommandInjectionMode is active.
on RS-232ports(LocalandLink)areinControl
off NoTPSlinkbetweenthetransmitterandthereceiver.
blinkingslow Lowpowermode(LPPF1orLPPF2)isactive.
blinkingfast Ethernet fallback mode is active.
on TPSlinkisestablished,HDBaseTorLongReachmodeisactive.
section
15
#bootload
Mode.