Content Of Backup File; Ubex-Pro20-Hdmi-F100 / R100 - Transmitter Mode; Ubex-Pro20-Hdmi-F100 / R100 - Receiver Mode - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     
12. Appendix 12. Appendix
Parameter
Analog audio input port properties
Volume 0.00 dB (100%)
Balance 0 (center)
Gain 0.00 dB
Analog audio output port properties
Volume 0.00 dB (100%)
Balance 0 (center)
Network settings
Static IP address - TX mode 192.168.0.101
Static IP address - RX mode 192.168.0.102
Static IP address - TRX mode 192.168.0.101
DHCP (dynamic IP address) Disabled
Subnet mask 255.255.255.0
Static gateway 192.168.0.1
LW3 port number 6107
HTTP port number 80
RS-232 port settings
Operation mode Command injection
TCP port 8001
Baud rate 57600
Data bits 8
Parity None
Stop bits 1
Miscellaneous
Application mode Auto
Unique port names Cleared
Unique device label Cleared
User EDIDs Not cleared
12.5. Content of Backup File
Setting/Value
The backup file contains numerous settings and parameters saved
from the device. When the file is uploaded to a device, the followings
will be overwritten.
For the procedure of the backup and restore function see the details in
the Configuration Cloning (Backup Tab)
12.5.1. UBEX-PRO20-HDMI-F100 / R100 - Transmitter Mode
Application mode selection setting
Video stream switch state, Audio stream switch state
Video port name
HDCP setting
Enable/disable status
Color space conversion setting
Enable/disable status, Resolution setting, Image position
Color space conversion setting
Enable/disable status, Resolution setting
Color space conversion setting
Port name, HDCP mode, Power +5V mode, Color depth setting
Enable/disable status, Mode setting
Static IP address, Network mask, Gateway address
DHCP status (enable / disable)
Device label, Control lock status
Display brightness, Jog dial rotary direction, Fan setting
User EDID data (U1-U12), Emulated EDIDs by ports
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
section.
General
Crosspoint settings
HDMI input ports
Stream settings
Scaler settings
Frame rate converter (FRC) settings
HDMI output ports
Ethernet ports
Miscellaneous settings
12.5.2. UBEX-PRO20-HDMI-F100 / R100 - Receiver Mode
General
Application mode selection setting
Crosspoint settings
Video stream switch state, Audio stream switch state
Stream settings
Enable/disable status
Color space conversion setting
Scaler settings
Enable/disable status, Resolution setting, Image position
Color space conversion setting
Frame rate converter (FRC) settings
Enable/disable status, Resolution setting
Color space conversion setting
HDMI output ports
Port name, HDCP mode, Power +5V mode, Color depth setting
No sync screen mode, No sync screen color
Ethernet ports
Enable/disable status, Mode setting
Static IP address, Network mask, Gateway address
DHCP status (enable / disable)
Miscellaneous settings
Device label, Control lock status
Display brightness, Jog dial rotary direction, Fan setting
User EDID data (U1-U12), Emulated EDIDs by ports
133 133