Content Of Backup File; Factory Default Settings; Maximum Extension Distances - Lightware HDMI20-OPTC series User Manual


  
10. Appendix
10.3. Content of Backup File
Transmitter
HDMI Input (I1, I2)
Port name
Mute/ unmute input ports
Lock/ unlock input ports
Crosspoint settings
Optical Output (O1)
Port name
Mute/ unmute output port
Lock/ unlock output port
Autoselect settings
Signal type
HDMI Output (O2)
Port name
Mute/ unmute output port
Lock/ unlock output port
Autoselect settings
Signal type
+5V Enable
RS-232
Port name
RS-232 mode
Baud rate/ Data bits/ Stop bits/
Parity
Command injection enable/ Port
Control protocol
Ethernet
Port name (P1, P2, P3, P4)
Enable (P1, P2)
EDID Settings
User EDID U1-14
Emulated EDIDs
Event Manager
Events 1-20
Front Panel Control
Display brightness
Rotary direction
Control lock
Dark mode enable
Transmitter
Receiver
Dark mode delay
Device label
Network
DHCP enable
Static IP address
Optical Input (I1) Static network mask
Port name Static gateway address
Mute/ unmute output port Remote device (Receiver)
Lock/ unlock output port Conversion mode
O1 +5V Enable
Signal type O2 +5V Enable
HDMI Output (O1,O2,O3) O3 +5V Enable
Port name
10.4. Factory Default Settings
Mute/ unmute output port
Lock/ unlock output port
Factory Default Settings of the Transmitter
Transmitter
Signal type
Video settings: HDMI Input
+5V Enable
Port number
RS-232
Port name Port name
RS-232 mode Mute/ unmute input ports Unmuted
Baud rate/ Data bits/ Stop bits/ Lock/ unlock input ports
Parity
Crosspoint settings
Command injection enable/ Port HDCP settings (I1 / I2)
Video settings: Optical Output
Control protocol
Port name
Ethernet
Port number
Port name (P1, P2, P3, P4)
Mute/ unmute output port Unmuted
Enable (P1, P2)
Lock/ unlock output port
EDID Settings
Autoselect settings
User EDID U1-13
Signal type
Emulated EDIDs
Video settings: HDMI Output
Event Manager
Port name
Events 1-20
Port number
Front Panel Control
Mute/ unmute output port Unmuted
Lock/ unlock output port
Autoselect settings
Signal type
Dark mode enable
+5V Enable
HDMI20-OPTC series – User's Manual
Receiver
Dark mode delay
Device label
Network
DHCP enable
Static IP address
Static network mask
Static gateway address
I1, I2
HDMIIN1, HDMIIN2
Unlocked
I1:O1; I1:O2
Allow HDCP 1.4 or 2.2 / Allow HDCP 1.4
OPTOUT
O1
Unlocked
Disabled
Auto
HDMIOUT
O2
Unlocked
Disabled
Auto
Always on
Transmitter
Front panel settings
Display brightness 10
Rotary direction CW
Control lock Unlock
Dark mode enable, dark mode
Disable
delay
General
Device label HDMI20-OPTC-TX220-PRO
Network
DHCP enable Disabled
Static IP address 192.168.0.101
Static network mask 255.255.255.0
Static gateway address 192.168.0.1
Remote device (Receiver)
Conversion mode No conversion
O1 +5V Enable (Output 1/A) Always on
O2 +5V Enable (Output 1/B) Always on
O3 +5V Enable (Output 2) Always on
71