Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
15 –
Cylinder Head, Valvetrain
1
Cylinder Head
⇒ 1.1 Overview - Cylinder Head , page 90
⇒ 1.2 Overview - Camshaft Housing , page 93
⇒ 1.3 Cylinder Head, Removing and Installing , page 94
⇒ 1.4 Vacuum Pump, Removing and Installing , page 100
⇒ 1.5 Compression Pressure, Checking , page 101
1.1
Overview - Cylinder Head
Note
Replace the cylinder head bolt.
♦
Always replace self-locking nuts, bolts which have been tight‐
♦
ened to tightening specifications as well as gaskets and O-
rings.
The plastic protectors installed to protect the open valves must
♦
only be removed immediately before mounting the cylinder
head.
The engine oil and the coolant must be changed if the cylinder
♦
head or the cylinder head gasket are being replaced.
90
Rep. Gr.15 - Cylinder Head, Valvetrain
.
.
.
.
.