– Install the bolts -arrows- and tighten them. Tightening specifi‐
cation. Refer to -item 4-
– Lubricate the holes -arrows- with engine oil.
Note
Adapter sleeve -1- is not present on every bearing bracket.
– Attach the bearing mount. Do not tilt it when doing this. Hand-
tighten the bolts -arrows-.
– Remove the Tensioner Locking Tool - T40267- .
– Tighten the bearing bracket bolts -item 5-
⇒ Item 5 (page 115)
.
– Install the pilot valves -item 6-
– Let the engine turn a second time in the direction of engine
rotation.
Note
Due to the ratio, the painted chain links no longer match up after
the engine has been turned.
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
⇒ Item 4 (page 91)
.
⇒ Item 7 (page 115)
Golf 2015 ➤ , Golf Variant 2015 ➤
.
129
3. Chain Drive