Emissions Control; Overview - Emissions Control - Volkswagen Golf 2015 Repair Manual

Golf 2015 ➤ , Golf Variant 2015 ➤
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
2

Emissions Control

⇒ 2.1 Overview - Emissions Control , page 348
⇒ 2.2 Catalytic Converter, Removing and Installing , page 349
2.1

Overview - Emissions Control

1 - Bolt
❑ 20 Nm
2 - Bracket
❑ Replace if damaged
3 - Bolt
Tightening specification and
sequence. Refer to
⇒ Fig. Catalytic Converter -
Tightening Specification and
Sequence , page 349 .
4 - Nut
Tightening specification and
sequence. Refer to
⇒ Fig. Catalytic Converter -
Tightening Specification and
Sequence , page 349 .
5 - Bracket
❑ For catalytic converter
6 - Catalytic Converter
❑ With front exhaust pipe
❑ Protect catalytic con‐
verter from shocks and
impact stress
❑ Removing and instal‐
ling. Refer to
⇒ 2.2 Catalytic Con‐
verter, Removing and
Installing , page 349
❑ Align the exhaust sys‐
tem free of tension. Re‐
fer to
⇒ 1.4 Exhaust System,
Installing without Ten‐
sion , page 345 .
7 - Screw-Type Clamp
❑ Replace after removing
❑ Installed position. Refer to
⇒ Fig. Installed Location of the Catalytic Converter Screw Clamp , page 349
❑ Tightening specification and sequence. Refer to
⇒ Fig. Catalytic Converter - Tightening Specification and Sequence , page 349
8 - Seal
❑ Replace after removing
9 - Turbocharger
❑ Removing and installing. Refer to
348
Rep. Gr.26 - Exhaust System, Emission Controls
.
.
⇒ 1 Turbocharger , page 256
.
.
.