Volkswagen Golf 2015 Repair Manual page 323

– Remove the left and right bolt -arrow-.
– Unclip and remove the lower section -1- of the air duct.
– Remove the noise insulation. Refer to ⇒ Body Exterior; Rep.
Gr. 66 ; Noise Insulation; Overview - Noise Insulation .
– Free up the coolant hose -3-.
– Remove the connector -1- from the Charge Air Pressure Sen‐
sor - G31- .
– Remove the bolts -arrows-.
– Loosen air guide hose clamp -2- and remove the air duct hose
from the Throttle Valve Control Module - GX3- downward.
– Remove the nut -2- and bolt -3- and then remove the intake
manifold support.
– Remove the rubber bushing -1- for the intake manifold sup‐
port.
– Use the Elbow Assembly Tool - T10118- -1- to release the
connector from the Fuel Pressure Sensor - G247- .
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
Golf 2015 ➤ , Golf Variant 2015 ➤
315
5. Sensors