Oil Pan Upper Section, Removing And Installing - Volkswagen Golf 2015 Repair Manual

– Remove the bolt -1- and remove the oil baffle -2-.
Installing
– Install a new oil baffle. Tightening specification. Refer to
-item 7- ⇒ Item 7 (page 180)
– Remove the sealant residue and clean the sealing surface.
– Apply silicone sealant on the sealing surface of the oil pan
lower section as shown.
– Tighten the new bolts -1 through 20- in two stages in the se‐
quence shown:
Step
1. Bolts -1- through -20-
2. Bolts -1- through -20-
– Fill with engine oil and then check the level. Refer to ⇒ Main‐
tenance ; Booklet ; Engine; Draining; Oil Filter, Replacing;
Engine Oil, Filling .
1.4 Oil Pan Upper Section, Removing and
Installing
Special tools and workshop equipment required
♦ Elbow Assembly Tool - T10118-
♦ Chain Tensioner Locking Tool - T40265-
♦ Hand drill with plastic brush attachment
♦ Protective eyewear
♦ Silicone grease. Refer to the Parts Catalog.
Caution
This procedure contains mandatory replaceable parts. Refer
to component overview prior to starting procedure.
Mandatory Replacement Parts
♦ Bolts - Upper Oil Pan
Engine Mechanical, Fuel Injection and Ignition - Edition 04.2015
.
Tightening Sequence and
Tightening Specification
Pre-tighten to 8 Nm
45° additional turn
Golf 2015 ➤ , Golf Variant 2015 ➤
1. Oil Pan/Oil Pump
185